Many causes can render your electrical fence energizer ineffective. This will occur on account of improper grounding and moist circumstances akin to heavy snowfall and even spring weeds can impression the bottom connection. A correctly working electrical fence grounding system is vital for the electrical present to successfully preserve cattle contained and predators out, says James Falbo, VP of engineering at AgraTronix, makers of Energy Wizard model electrical fence energizers.
Falbo affords these six, electrical fence grounding tricks to take into account this spring to make sure your electrical fence chargers are grounded and dealing correctly:
- Test your floor system and the voltage of your electrical fence in the course of the wettest and driest seasons of the 12 months to make sure satisfactory electrical fence grounding of your system whatever the circumstances of your land.
- After correctly shorting out the electrical fence, use an electrical fence voltmeter to examine the voltage ranges of your fence energizer.
- Be sure to use 10- to 14-ga. insulated lead-out wire rated at 20,000V. Utilizing family or industrial cables made for less than 400V are usually not sufficient to help the system.
- Ensure the proper kind of rod is used for the grounding, for instance pipe or rebar. It must be galvanized metal not less than 4 ft. lengthy. Don’t use copper floor rods as these will decrease the effectiveness of the connection.
- If the ability shouldn’t be enough, you might want so as to add one other grounding rod to your electrical fence grounding system. Most fences would require two or three grounding rods positioned about 10 ft. aside, close to the start line of the fence.
- Make it possible for your floor rods are far sufficient away out of your utilities, particularly your phone strains. If the rods are too near the utility grounds they’ll trigger interference in your telephone or electrical strains.
